Functional positioning As the 'brain' of the safety pad system, it can accommodate up to 8 independent safety pads. When there is no one in the detection area and the system self-test is normal, the internal safety contacts close and send an "enable" signal to the machine safety circuit; Once personnel step on any mat or any channel and a malfunction occurs, immediately disconnect the safety output and trigger the equipment to shut down. Electrical and Interface Power supply: 24 VDC (± 20%), built-in electronic short-circuit protection. Safe output: 2 redundant normally open passive contacts, rated at 6 A/250 VAC, can be directly connected to the safety relay chain or safety PLC input. Reset: Equipped with a built-in selection switch, it can be set to manual reset (by pressing an external button) or automatic reset. Connection method: Using 8-pin M12 quick plug (Euro type)+cable clamp, on-site wiring is fast, and the entire meter can be unplugged and plugged during maintenance. security level Compliant with ISO 13849-1 PLd, IEC 62061 SIL CL 2, IEC 61508 SIL 2. A single channel fault enters a safe state, meeting the requirements of EN 1760-1 for pressure sensitive protection devices. Typical Applications Ground protection around robot/automation line body The entrance to the machining center and assembly station will stop immediately upon stepping on the mat Form a secondary protection or perimeter protection system with light curtains and fences“
Sertakan nomor part, jumlah, dan target tanggal. Kami konfirmasi stok atau lead time, menawarkan alternatif bila kosong, dan menerbitkan invoice komersial dengan HS code.
Kirim BOM atau nomor part; kami balas dalam satu hari kerja.
Hubungi kami
