937CU-AIHLP-DC1 HART Loop Converter Analog Input.
Input/Output 1 channel of HART analog input, compatible with HART 5... 7 version transmitters Provide 24V intrinsic safety power supply to the transmitter circuit without the need for additional power supply The output terminal provides isolated 4-20 mA signals, which can be directly connected to PLC/DCS analog modules Intrinsic safety and isolation Equipped with an Intrinsically Safe circuit that meets Ex ia IIC T4 Ga requirements, it can be installed in Zone 1/2 hazardous areas 2500 V three terminal isolation (input-output power supply), suppressing ground current and surge Machinery and Power Supply Power supply: 24 VDC (18... 32 V), power consumption approximately 0.6 W The shell width is only 40mm, and it is installed on a 35mm DIN rail Working temperature -20...+60 ° C, IP20 terminal Typical Applications Isolate and convert the HART+4... 20 mA signals of the intelligent pressure, temperature, and flow transmitters in the hazardous area, and send them to the AI card of the PLC/DCS in the safe area In situations where reading HART digital diagnostic information is required but a HART multiplexer cannot be arranged, it can be used as a simple alternative solution“
Sertakan nomor part, jumlah, dan target tanggal. Kami konfirmasi stok atau lead time, menawarkan alternatif bila kosong, dan menerbitkan invoice komersial dengan HS code.
Kirim BOM atau nomor part; kami balas dalam satu hari kerja.
Hubungi kami
